CompuLab introduces CM-T3530 – tiny OMAP based System-on-module

HAIFA, ISRAEL – November 09, 2009 – CompuLab introduces CM-T3530 – the most feature-rich miniature System-on-Module based on Texas Instruments OMAP3530. The CM-T3530 is targeting low-power embedded and commercial applications, providing a rich set of multimedia, connectivity and storage features on a credit-card size system-on-module.
Irad Stavi, Director of Business Development at CompuLab said:
“Embedded systems need to provide users with the user interface and connectivity they expect.  CM-T3530 enables that by using the same OMAP3530 found in today’s most advanced smartphones, while being extremely flexible and developer-friendly”.
About the CM-T3530 module
Hardware Features:
> TI OMAP3503 / OMAP3530 with Cortex-A8 core at 720 MHz
> Up to 256 MB mDDR
> Up to 512 MB flash disk
> 3D and video decoding acceleration
> LCD interface at resolution up to 1400 x 1050
> TV out PAL / NTSC
> Resistive TS controller
> Camera interface up to 16 Mpixels
> Audio codec stereo line-out and mic
> 10/100 Ethernet
> Integrated WiFi 802.11b/g
> USB2 OTG + 2 USB2 Host ports
> 2 SD ports
> 3 serial ports
> I2C, SPI and GPIOs
> CM-T3530 is supported in mainline Linux kernel from rev 2.6.33
> Full OpenEmbedded Angstrom Linux distribution available from CompuLab
> Full support for Windows CE 6.0 R3 from CompuLab
Mechanical and Electrical:
> Size: 66 x 44 x 7 mm
> Interface: 2 x 140 pin connectors
> Power supply: 3.8V or Li-ion battery
> Power consumption: 0.2 – 2W
SB-T35 base-board
The SB-T35 base-board turns the CM-T3530 into a ready-to-use SBC with dual Ethernet and all the common display interfaces – parallel RGB, LVDS, DVI and S-video. All the other interfaces available on CM-T3530 are brought out on standard I/O connectors.
Pricing and Availability
CM-T3530 and SB-T35 are available now starting from $55 and $57 respectively for 1K units.
About CompuLab
CompuLab is a leading manufacturer of computer boards for embedded systems, which was established in 1992.
CompuLab boards are embedded in telecommunication systems, automotive devices, gaming systems, medical devices, aerospace and marine systems, and countless other applications.
All CompuLab products are manufactured and tested in CompuLab’s facilities in Haifa, Israel.
CompuLab products meet all environmental standards, are lead-free and RoHS compliant.