Cables, Connectors and Accessories

The table below lists accessories available for CompuLab embedded products:

SoM mating connectors
Connectors, cables and adapters needed to connect carrier-boards and SBCs to standard peripherals
Accessory sets as in evaluation kits
LCD kits

P/N	Description	Used with	Min. Order QTY
ANTWIFI	WiFi antenna, 2.4Ghz, RP-SMA	All CMs and SOMs	30
CABANT	Antenna cable, RP-SMA to U.FL / I-PAX, 11cm, p/n 199D10210	All CMs and SOMs	30
CABDB9RJ11	Null modem cable, DB9 (F) to RJ11, 2m, p/n 504F010030	SB-X270 SB-iGLX	10
CABDB9UMP	Cable, DB9-F to Ultra Mini Plug (USB like), 2m, p/n 199D10170	All SB and SBC	10
CABFPC20	FPC cable for CONFxxx, 0.5mm, 20-pos, 15 cm, p/n 410X60200	SB-X270 EM-X270 SB-X300	30
CABFPC40	FPC cable for IDEFPC, 0.5 mm, 40-pos, 5 cm, p/n 410X60400	SB-X300	30
CABFPC51	FPC cable for CONLCD, 0.3 mm, 51-pos, 30 cm, p/n 410X60510		20
CON140	140-pos mating connector (Foxconn QTS1140A-1021B-7H). For all modules with CAMI interface. p/n 182K14000S	All CM	200
CONDB9	Adapter - header to DB-9, for COM port, p/n 199D10020	All SB	10
CONUSB	Adapter - 100-mil header to USB connector, p/n 199D10070	All SB	10
LCD35	3.5", TFT, 480 x 640, including touchscreen, p/n 139D3V000. Note: This panel is intended for evaluation purpose. It cannot be purchased for mass production.	EM-X270 SB-X300 EM-T3	8
STANDOFF	Standoffs set for CAMI cards, includes two screws and spacer. Single pack contains 400+ sets, required for 100 cards plus spare. p/n 383D52530, 380J52020	All CM	400

Notes:

Connectors and cables can be obtained directly from the manufacturer. For the manufacturer’s references of CoM mating connectors, please refer to the Reference Guide of the relevant CoM product.
“Order QTY” specifies both the minimum quantity for order and also the quantity multiple. For example, if order quantity is 15, then the item can be ordered in quantities of 15, 30, 45 and so on.
It is also possible to buy sets of cables / connectors, packaged as “Accessory set as in Eval Kit”. See “Accessories for Evaluation” table below.

Accessories for evaluation kits

Name	Description
ACCEV-iMX7	Accessory set as in EVAL-iMX7
ACCEV-iMX6	Accessory set as in EVAL-iMX6
ACCEV-AM57x	Accessory set as in EVAL-AM57x
ACCEV-iMX6UL	Accessory set as in EVAL-iMX6UL
ACCEV-T43	Accessory set as in EVAL-T43
ACCEV-T335	Accessory set as in EVAL-T335

CompuLab