SB-COMEXmini Carrier Board

COM Express Mini Evaluation Carrier Type-10

  • Miniature form-factor
  • HDMI, DisplayPort, LVDS
  • USB3, 4x USB2, 2x GbE
  • mini-PCIe, mSATA, SATA

COM Express evaluation board

SB-COMEXmini is a COM Express carrier board designed as an evaluation platform for COM Express Mini Computer-on-Modules and a reference for custom carrier board development. SB-COMEXmini is fully compliant with the COM Express standard.

Optimized for development with COM Express Mini

SB-COMEXmini has been designed to allow users full and easy access to all functions present on COM Express Mini Type-10 Computer-on-Modules. Combining extensive and highly configurable set of interfaces and connectors with rich debug functionality, SB-COMEXmini allows all around evaluation and SW development with COM Express Computer-on-Modules.

Comprehensive design reference and documentation

CompuLab provides SB-COMEXmini with comprehensive documentation and hardware design packages including technical manuals, application notes, design schematics and layout design.

  • "Option" column specifies the configuration code required to have the particular feature.
  • "+" means that the feature is always available

General

Supported ModulesCOM Express mini with pin-out Type 10
+
ComplianceCOM Express Rev. 2.0
Pin-out Type 10
+

Display

HDMI1x HDMI (DDI0)
+
DisplayPort1x DP, standard DisplayPort connector
* mutually exclusive with LVDS
L
LVDS1x single-channel LVDS, 40-pos FPC connector
L

Storage

Hard Disk1x SATA ports, SATA connector
+
mSATAmSATA socket (mini-PCIe form-factor)
+
SD1x uSD connector
+

Network

EthernetPrimary Gbit Ethernet port, RJ45 connector
Implemented with the COM Express Module Ethernet interface
+
Secondary Gbit Ethernet port, RJ45 connector
Implemented with on-board Intel I211 Ethernet controller
+

Audio

Analog AudioOn-board Realtek ALC888 codec
Stereo line-out and line-in audio jacks
+
Digital AudioS/PDIF output, electrical
+
HDMI audio output
+

I/O

PCI Express1x mini-PCie socket, full-size
+
1x mini-PCie socket, half-size
+
USB1x USB3.0
+
4x USB2.0
+
Serial1 x RS232 (RX/TX only), ultra-mini serial connector
+
GPIO5x GPIO, 100-mil header
+

System

General FeaturesFeature Connector
SIM socket
PWR / RST buttons
+
Debug FeaturesSPI boot
Port80 POST code display
Diagnostic LED
+
Power Supply12V DC Jack
+

Electrical Specifications

Supply Voltage
6.5V – 20V

Mechanical Specifications

Dimensions140 x 93 mm
Weight180 gram

Environmental and Reliability

MTTF> 200,000 hours
Operation temperature (case)Commercial: 0° to 70° C
Extended: -20° to 70° C
Industrial: -40° to 85° C. Click for availability note
Storage temperature-40° to 85° C
Relative humidity10% to 90% (operation)
05% to 95% (storage)
Shock50G / 20 ms
Vibration20G / 0 - 600 Hz
SB-COMEXmini COM Express Carrier Board block diagram

Product status: Active

The CompuLab part number specifies all options available for a particular product.
P/N template: SB-COMEXmini-[L]

Minimal Configuration

Minimal configuration P/N: SB-COMEXmini
1K-units price
$85

Optional Features

FeatureOptionsP/N codeAdd ($)
LVDS interfaceNo
Yes
-
L
-
1
Temperature rangeCommercial
Extended
Industrial
-
TE
TI
-
20
100
  • Prices are specified in U.S. Dollars. Prices are periodically updated according to variations in component costs. Prices are subject to change without advance notice.

Small Quantity Orders

Pricing is specified for 1000-unit orders. In order to calculate the price for another quantity, multiply the unit price (with selected options) by the factor listed in the table below:

QTYFactor
1K1.0
5001.1
1001.2
101.3
11.4

Coming Soon